# Parts - 1x Home Depot HDX 27 gallon storage bin (black) - 1x Sterilite ???? bin - Note -- try and find a bin that isn't watertite or filters UV light (many do) - ~10ft [18awg Red/Black Zip Cord](https://www.amazon.com/dp/B0796JP1Q9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) - ~1-3ft 24/2 or similar two conductor wire to extend the temperature probe (if needed) - 1x [150W 12VDC LED Power Supply](https://www.amazon.com/dp/B08Q2TWYRJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) - 1x [12VDC Switches](https://www.amazon.com/dp/B0CPY6FM4B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) - 1x [W1209 12VDC Digital Temperature Controller](https://www.amazon.com/dp/B07VDRGK9F?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) - 1x [12VDC Beverage Heater](https://www.amazon.com/dp/B001AQZI64?ref=ppx_yo2ov_dt_b_fed_asin_title) - 1x [20ft roll 12V UV LED Strip](https://www.amazon.com/dp/B083138WRC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) - Foil Tape - Clear Packing Tape (to insulate the LED strips) - Small Project Box (example: 100mm x 50mm x 68mm) # Usage 3% Hydrogen Peroxide allows you to sit the parts sit for long periods of time and not get overdone or blotchy. I get 12% Hydrogen Peroxide from Home Depot and dilute with distilled water.