#electronics #connectors #splicing #solder-sleeve #raychem #digikey #parts
# Overview
TE Connectivity **Raychem SolderSleeve CWT-900x** is the name-brand original of the "solder seal" heat-shrink butt splices sold on Amazon (e.g. the [Haisstronica kit](https://www.amazon.com/dp/B08F46WKCZ) I've been using for field work). Same idea: a clear crosslinked polyolefin sleeve with a pre-fluxed solder ring in the middle and two colored thermoplastic sealing rings at the ends. One hot-air pass solders, insulates, strain-relieves, and splash-seals the joint.
Five sizes cover **26 AWG → 10 AWG** for one-to-one splices (TE's selection table), with the combined-CMA rating stretching the top end to ~8 AWG. All are stocked at Digi-Key USA under $1.20 each except the largest.
# Configuration
## Sizing
**Size from TE's selection table (Table A in the Raychem Electrical Interconnect Products catalog), not from the AWG range printed on the product pages.** The product-page ranges ("18–22 AWG" for CWT-9001, "14–18" for -9002, etc.) run a full size larger than what TE's own table recommends for a 1:1 splice — they appear to be derived from the combined-CMA figure. The practical upshot: **26 and 24 AWG belong in the CWT-9001**, and 22 AWG already moves up to the -9002.
### One-to-one and two-wire splices (TE Table A)
| Part | Ring | 1:1 splice | Two-wire combos |
|---|---|---|---|
| CWT-9001 | Clear | 26↔26, 26↔24, 24↔24, 24↔22 | 2×26→26, 2×24→24 |
| CWT-9002 | Red | 22↔22, 22↔20, 20↔20, 20↔18 | 2×24→2×24, 2×22→22, 2×22→2×22 |
| CWT-9003 | Blue | 18↔18, 18↔16, 16↔16, 16↔14, 14↔14 | 2×20→20, 2×18→18 |
| CWT-9004 | Yellow | 14↔12, 12↔12 | — |
| CWT-9005 | Grey | 12↔10, 10↔10 | — |
Crosswalk from the Amazon-kit color code I'm used to:
| Amazon kit | Covers | TE equivalent |
|---|---|---|
| White "26–24 AWG" | 26, 24 | **CWT-9001** |
| Red "22–18 AWG" | 22, 20 → -9002; 18 → -9003 | CWT-9002 / CWT-9003 |
| Blue "16–14 AWG" | 16, 14 | CWT-9003 |
| Yellow "12–10 AWG" | 12 → -9004; 10 → -9005 | CWT-9004 / CWT-9005 |
So the generic red splits across two TE sizes and the generic yellow across two — the TE sleeves are sized tighter.
### Dimensions (TE drawing CWT-900X)
| Part | mm² | Combined CMA | Insulation OD range | Length |
|---|---|---|---|---|
| CWT-9001 | 0.3–0.8 | 450–1,500 | 0.015–0.065" (0.4–1.7 mm) | 1.025" (26 mm) |
| CWT-9002 | 0.8–2.0 | 1,250–3,500 | 0.050–0.105" (1.3–2.7 mm) | 1.655" (42 mm) |
| CWT-9003 | 2.0–4.0 | 2,500–7,200 | 0.070–0.180" (1.8–4.5 mm) | 1.655" (42 mm) |
| CWT-9004 | 4.0–6.0 | 6,100–19,000 | 0.110–0.235" (2.8–6.0 mm) | 1.655" (42 mm) |
| CWT-9005 | 6.0–10.0 | 12,000–25,000 | 0.125–0.275" (3.2–7.0 mm) | 1.655" (42 mm) |
- **Combined CMA** = the sum of every conductor going into the splice, both sides. For anything Table A doesn't cover (three wires, mixed sizes), add up the CMA and pick by this column.
- The insulation OD range matters as much as the gauge — the sleeve has to recover down onto the wire jacket to seal. Thin-wall PTFE/silicone wire may need to drop a size.
## Digi-Key USA ordering
Pricing and stock as of 2026-11-02. Standard package is 100 but Digi-Key sells singles.
| Part | Digi-Key P/N | Qty 1 | Qty 100 | In stock |
|---|---|---|---|---|
| [CWT-9001](https://www.digikey.com/en/products/detail/te-connectivity-raychem-cable-protection/CWT-9001/573479) | CWT9001-ND | $0.86 | $0.62 | 70,548 |
| [CWT-9002](https://www.digikey.com/en/products/detail/te-connectivity-raychem-cable-protection/CWT-9002/573480) | CWT-9002-ND | $0.81 | $0.58 | 135,435 |
| [CWT-9003](https://www.digikey.com/en/products/detail/te-connectivity-raychem-cable-protection/CWT-9003/573481) | CWT-9003-ND | $0.97 | $0.70 | 15,551 |
| [CWT-9004](https://www.digikey.com/en/products/detail/te-connectivity-aerospace-defense-and-marine/CWT-9004/2046054) | CWT-9004-ND | $1.11 | $0.80 | 20,558 |
| [CWT-9005](https://www.digikey.com/en/products/detail/te-connectivity-aerospace-defense-and-marine/2-1190624-2/2046055) | 844-2-1190624-2-ND | $2.58 | $1.86 | 1,345 |
- CWT-9005 is listed under TE's newer number **2-1190624-2**; `CWT-9005` and `084483-000` are aliases on the same page. Searching "CWT-9005" on Digi-Key lands there directly.
- CWT-9001 through -9003 are catalogued under "TE Connectivity Raychem Cable Protection"; -9004 and -9005 under "TE Connectivity Aerospace, Defense and Marine". Same product line, just Digi-Key's manufacturer split.
# References
- [TE CWT-900X specification control drawing](https://www.farnell.com/cad/1445869.pdf) — part table, materials, dimensions
- [TE Raychem Electrical Interconnect Products catalog](https://docs.rs-online.com/a831/A700000013653945.pdf) — Table A (p. 8) is the AWG-combination selection grid for B-155-900x / CWT-900x
- [TE CWT-9002 datasheet](https://onlinecomponents.com/productfiles/mf-ray/pgurl_5237782459712973.pdf)
- [TE CWT-9003 datasheet](https://www.mouser.com/datasheet/3/2640/1/product-114163-000.datasheet.pdf)
- [TE Raychem D-1744 customer drawing](https://cdn.soselectronic.com/productdata/17/02/8e2b9347/d-1744-01-448859-000.pdf)
- [Digi-Key: SolderSleeve Wire Splices product highlight](https://www.digikey.com/en/product-highlight/t/te-connectivity/solder-sleeve-wire-splices)
- [Digi-Key forum: Solder Sleeve selection guide](https://forum.digikey.com/t/solder-sleeve/32247)
- [Glenair: Heat Shrink Terminations and In-Line Splices](https://www.glenair.com/heat-shrink-termination-sleeves-and-in-line-splices/pdf/configurations.pdf) — AS83519 / AS81824 context
- [Haisstronica solder seal connectors (Amazon)](https://www.amazon.com/dp/B08F46WKCZ) — the generic kit this note replaces
- [[Connector Crimping]]
- [[Wire and Cable Sleeves]]
# Changelog
## 2026-11-02
- Note created. Part data from the TE CWT-900X drawing and TE product datasheets; Digi-Key USA links, pricing, and stock captured the same day.
- Sizing section rewritten against TE catalog Table A after noticing the product-page AWG ranges run a size large. 26/24 AWG → CWT-9001. Added Amazon-kit color crosswalk and split the sizing table into selection + dimensions.