I have a ton of LEGO models which use LightMyBrick(tm) lighting kits. The version 1 system uses tiny JST connectors. I designed a simple board to transition from the little JST connect to black 26awg 2-conductor silicone wire so I can extend the power supplies for each model out of sight. Ultimately, I need to combine all the models into a larger 5VDC power supply. ## Design - 20 positions of 2-pole terminal block - 10 spots on each side - Silk Screen Position Information - USB-B connector??? - how much power do we need to support?... ## Terminal Blocks [2 Position Top Entry](https://www.mouser.com/ProductDetail/TE-Connectivity/284093-2?qs=d7AK1sN4O8w5lXZgmdZSng%3D%3D) - P/N: 284092-2 - 56 cents each Backup Plan [2 Position Side Entry](https://www.mouser.com/ProductDetail/TE-Connectivity/282837-2?qs=A%252Bip%252BNCYi6O2H0NGWOeAxg%3D%3D) - P/N: 284093-2 - 78 cents each