#prusawire #voron #switchwire #3dprinting #prusa ![[IMG_6169 Large.jpeg|500]] ## Build Specs - Prusament ASA Lipstick Red - Prusament ASA Galaxy Black - Spare MK3S frame + MK3 Y-carriage - LDO Switchwire MK52 Heatbed - LDO Switchwire stepper motor kit - Use Meanwell LRS-350-24 PSU - BTT SKR Mini V3 3.0 + BTT HDMI5 v1.2(3?) screen - Stealthburner - LDO NiteHawk-SB Toolboard - West3D Beserker 5015 Fan - West3D Beserker 4010 Fan - KB3D Rainbow Barf Neopixel - Bambu X1C 0.4mm Hotend Stealthburner with X1 Hotend! [Increase 3D Printer Flow Dramatically: X1 Hotend Stealthburner Install - YouTube](https://www.youtube.com/watch?v=eouvwMfnJaU&t=38s) ## Build Log - 2025-09-30 - Functional enough to get serial# approved! **PW.0011** - 2025-10-08 - Replaced proper spacer on center support of heatbed. - TODO: - Print fixed XZ Blocks (left and right) to allow for extrusion tolerance - Install Filament Runout Switch into Stealthburner - Tuning+++++++++ ## Printed Parts | | File Name | Material / Color | Quantity | Notes | | ------------------------------- | --------------------------------------------------- | ----------------------------------------------- | -------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | **XZ Axis** | `x_motor_mount_a_10mm` | ASA Galaxy Black | 1 | Using 10mm Z rods from MK3.9 | | | `z_motor_mount_a_10mm` | ASA Galaxy Black | 1 | Using 10mm Z rods from MK3.9 | | | `[a]_x_idler_block_a_10mm` | ASA Lipstick Red | 1 | Using 10mm Z rods from MK3.9 | | | `[a]_z_idler_block_a_10mm` | ASA Lipstick Red | 1 | Using 10mm Z rods from MK3.9 | | | `[a]_x_motor_mounts_b` | ASA Lipstick Red | 1 | | | | `[a]_z_motor_mounts_b` | ASA Lipstick Red | 1 | | | | `x_idler_block_b` | ASA Galaxy Black | 1 | | | | `z_idler_block_b` | ASA Galaxy Black | 1 | | | **X Gantry** | `x_carriage_left` | ASA Galaxy Black | 1 | | | | `x_carriage_right` | ASA Galaxy Black | 1 | | | | `carriage_block` | ASA Galaxy Black | 1 | | | | `gantry_frame_bumper` | ASA Galaxy Black | 1 | | | | `[a]_belt_tension_retainers` | ASA Lipstick Red | 1 | | | | `belt_clip_2x` | ASA Galaxy Black | 2 | | | | `[a]_belt_clip_2x` | ASA Lipstick Red | 2 | | | | `[a]_x_block_front` | ASA Lipstick Red | 1 | Model updated 8/1/2025 | | | `[a]_x_block_rear` | ASA Lipstick Red | 1 | Model updated 8/1/2025 | | | `[a]_x_end_bearing_holder` | ASA Lipstick Red | 1 | | | | `[a]_z_block_front` | ASA Lipstick Red | 1 | Model updated 8/1/2025 | | | `[a]_z_block_rear` | ASA Lipstick Red | 1 | Model updated 8/1/2025 | | | `[a]_z_end_bearing_holder` | ASA Lipstick Red | 1 | | | | `superpinda_bracket` | ASA Galaxy Black | 1 | Model updated 7/30/2025 | | **Y Axis** | `y_motor_bracket` | ASA Galaxy Black | 1 | | | | `y_idler_bracket` | ==ASA Galaxy Black== | ==1== | ==NOTE: THIS NEEDS TO BE RE-PRINTED! @ellafoxo has a hotfix incoming as of 20250806== | | | `heatbed_cable_cover_top` | N/A | 1 | Have from existing heat bed! | | | `heatbed_cable_cover_bottom_2mm_nylon` | N/A | 1 | Have from existing heat bed! | | | `heatbed_cable_cover_bottom_3mm_nylon` | N/A | 1 | Have from existing heat bed! | | | `y_belt_tensioner_front` | ==ASA Galaxy Black== | ==1== | ==NOTE: THIS NEEDS TO BE RE-PRINTED! @ellafoxo has a hotfix incoming as of 20250806== | | | `y_belt_tensioner_rear` | ==ASA Galaxy Black== | ==1== | ==NOTE: THIS NEEDS TO BE RE-PRINTED! @ellafoxo has a hotfix incoming as of 20250806== | | | `[a]_belt_clip_2x` | ASA Lipstick Red | 2 | | | | `y_rod_holder_front_left` | ASA Galaxy Black | 1 | | | | `y_rod_holder_rear_left` | ASA Galaxy Black | 1 | | | | `y_rod_holder_front_right` | ASA Galaxy Black | 1 | | | | `y_rod_holder_rear_right` | ASA Galaxy Black | 1 | | | **Stealthburner** | `[a]_stealthburner_main_body` | ASA Lipstick Red | 1 | | | | `umbilical_strain_relief_by_nagelwerkstatt` | PC-CF Black | 1 | | | | `cw2_main_body_filament_sensor` | PC-CF Black | 1 | | | | `cw2_motor_plate` | PC-CF Black | 1 | | | | `[a]_cw2_latch` | ASA Lipstick Red | 1 | | | | `[a]_cw2_shuttle` | ASA Lipstick Red | 1 | | | | `[a]_guilder_part_a` | ASA Lipstick Red | 1 | | | | `[a]_guilder_part_b` | ASA Lipstick Red | 1 | | | | `cable_cover` | PC-CF Black | 1 | | | | `[a]_pcb_spacer` | ASA Lipstick Red | 1 | | | | ~~`[o]_led_diffuser_mask`~~ | ~~N/A ???~~ | | Should be good with part from KB-3D! | | | `led_carrier` | PC-CF Black | | | | | ~~`[c]_led_diffuser`~~ | ~~N/A ???~~ | | Should be good with part from KB-3D! | | **Stealthburner Hot End Mount** | `SB Bambu Hotend Insert` | PC-CF Black | 1 | [Voron Stealthburner Printhead for Bambu X1C/X1 Hotend by Rincewind76 \| Download free STL model \| Printables.com](https://www.printables.com/model/322091-voron-stealthburner-printhead-for-bambu-x1cx1-hote) | | | `SB Bambu Hotend Back` | PC-CF Black | 1 | | | | `SB Bambu Hotend Front` | PC-CF Front | 1 | | | **Frame** | `[a]_front_grill_logo_plates` | ASA Lipstick Red | 1 | | | | `front_grill_left` | ASA Galaxy Black | 1 | | | | `front_grill_right` | ASA Galaxy Black | 1 | | | | `[a]_rubber_foot_block_x4` | ASA Lipstick Red | 4 | | | | `m3_t_nut_3030_insert_by_kapplion` | N/A ??? | | use M3x3030 T-Nut from stock ideally? | | **Key-Back** | `key-bak_anchor` | ASA Galaxy Black | 1 | [Prusawire Key-bak mounting bracket by telefaksi \| Download free STL model \| Printables.com](https://www.printables.com/model/1371269-prusawire-key-bak-mounting-bracket) | | | `key-bak_anchor_cap` | ASA Galaxy Black | 1 | Updated 8/4/2025 to need no supports | | | `key-bak_bracket_plate` | ASA Galaxy Black | 1 | | | | `key-bak_bracket_left` | ASA Galaxy Black | 1 | Updated 8/4/2025 to need no supports! | | | `key-bak_bracket_right` | ASA Galaxy Black | 1 | | | **Electronics** | `wago_mount` | PC-CF Black | 1 | | | | `raspberry_pi_bracket` | PC-CF Black | 1 | | | | `daygreen_mosfet_bracket` | PC-CF Black | 1 | 24v-5vdc Buck Converter | | | ~~`heatbed_cable_clip`~~ | ~~ASA Galaxy Black~~ | ~~1~~ | Use old Einsy case | | | ~~`mcu_box_einsy`~~ | ~~ASA Galaxy Black~~ | ~~1~~ | Use old Einsy case | | | ~~`mcu_cover_einsy`~~ | ~~ASA Galaxy Black~~ | ~~1~~ | Use old Einsy case | | | `nitehawk_sb_usb_bracket` | PC-CF Black | 1 | | | **Panels** | `deck_panel_front` | ASA Galaxy Black | 1 | | | **MK3 LCD** | `[mmu]_lcd_cover_mk3` | ASA Galaxy Black | 1 | | | | `[a]_lcd_knob_tri_wing_mk3` | ASA Lipstick Red | 1 | | | | `[a]_lcd_knob_mk3` | ASA Lipstick Red | 1 | | | | `lcd_cable_clip_x4` | ASA Galaxy Black | 4 | | | | `LCD-support-L (MK3S+)` and `LCD-support-R (MK3S+)` | ASA Galaxy Black | 1 | Print Prusa Enclosure Mounts for MK3S! | | **Tools** | `pulley_alignment_jig` | PC-CF Black | 1 | | | | `mgn12_rail_guide_x2` | PC-CF Black | 2 | | | | `stealthburner_5015_cutting_tool_a` | PC-CF Black | 1 | | | | `stealthburner_5015_cutting_tool_b` | PC-CF Black | 1 | | | **Prusawire Badge** | `Prusawire Supplemental Badge (Combined)` | ASA Galaxy Black + Lipstick Red (filament swap) | 1 | [Prusawire Supplemental Badge by TheNexusAvenger \| Download free STL model \| Printables.com](https://www.printables.com/model/1368495-prusawire-supplemental-badge) |